Operation Manual
English - 79
TROUBLESHOOTING
9.4 Symptoms
If your robotic lawnmower does not work as expected, follow the troubleshooting guide below.
There is a FAQ (Frequently Asked Questions) on www.automower.com which provides more detailed answers to
a number of standard questions. It you still cannot nd the reason for the fault, contact the local dealer.
Symptoms Cause Action
The robotic
lawnmower has
difculty docking with
the charging station
The charging station is on a slope
Place the charging station on a surface that is
entirely level. See 3.2 Installation of the charging
station on page 17.
The boundary wire is not laid
correctly by the charging station.
Check that the charging station has been
installed according to the instructions. See 3.2
Installation of the charging station on page 17.
Uneven mowing
results
The robotic lawnmower works too
few hours per day.
Increase the working times. See 6.3 Timer on
page 44.
Not applicable for Automower® 310.
The Weather timer senses that the lawn has
been mowed more than it actually has. Increase
the intensity level in the Weather timer. If this
does not help, turn off the Weather timer.
The shape of the working area
requires manual settings to be made
for the robotic lawnmower to nd its
way to all remote areas.
Also use Lawn coverage to steer the robotic
lawnmower to one or more remote areas.
See 6.7 Installation on page 50.
Working area too large.
Try limiting the working area or extending the
working time. See 6.3 Timer on page 44.
Blunt blades.
Replace all the blades and screws so that the
rotating parts are balanced. See 8.7 Blades on
page 73.
Accumulation of grass by the blade
disc or around the motor shaft.
Check that the blade disc skid plate rotates
easily. If not, screw off the blade disc and remove
grass and foreign objects. See 8.5 Transport and
moving on page 72.
The robotic
lawnmower runs at the
wrong time
The robotic lawnmower clock needs
to be set.
Set the clock. See 6.8 Settings on page 59.
The start and stop times for mowing
are incorrect.
Reset the start time and stop time settings for
mowing. See 6.3 Timer on page 44.
The robotic
lawnmower vibrates
Damaged blades lead to imbalance
in the cutting system.
Inspect the blades and screws and replace them
if necessary. See 8.7 Blades on page 73.
Many blades in the same position lead
to imbalance in the cutting system.
Check that only one blade is tted at each screw.
Different versions (thickness) of
Husqvarna blades are used.
Check if the blades are of different versions.
OM_1157863-26_HQ 310,315,EN_160229.indd 79 2016-02-29 10:52:40