Operation Manual

3012-1409
Security
Security
level
Low Medium High
Duration
New loop
signal
Change
PIN code
Advanced
Duration of
alarm
Duration of
time lock
Custom
English - 47
MENU FUNCTIONS
6.5 Security
Through this selection, settings relating to security and
the connection between the mower and the charging
station can be made.
Security level
There are three security levels to choose from but it is
also possible to dene your own combination of security
functions.
The factory setting is security level Medium.
Use the down and up arrow keys to select a security level.
Low and medium security prohibits access to the robotic
lawnmower if the PIN code is unknown. High security also
includes a warning that beeps if the correct PIN code is
not entered after a designated time period.
To activate the robotic lawnmower, depress the stop
button and turn the main switch to 0.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without rst entering the correct
PIN code. When 30 days have passed, the robotic
lawnmower will continue to mow as normal, but the Enter
PIN code message will be displayed when the hatch is
opened. Then enter your code and press OK.
The PIN code must be entered every time the main switch
is set to 1.
PIN request
This function means that the robotic lawnmower requests
a PIN code each time the hatch is opened. The correct
PIN code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The blockage
time is extended for every new incorrect attempt.
Alarm
This function means that an alarm sounds if the PIN code
is not entered within 10 seconds after the STOP button
has been pressed or the robotic lawnmower has been
lifted up for any reason. A ticking noise indicates that the
PIN code must be entered to prevent triggering the alarm.
The alarm can be turned off at any time by entering the
correct PIN code.
1157866-26,420,430X,450X,EN_160314.indd 47 2016-03-14 16:59:11