Operation Manual

4 min
Slumpmässigt
Guide 1
Guide 2
Begränsningsslinga
=Fördröjningstid
=Sökning
11 min
3012-1089
3012-1441
=Delay
=Search
Boundary wire
Guide 2
Guide 1
Random
4 min 11 min
English - 56
MENU FUNCTIONS
Find charging station
The robotic lawnmower can be set to search for the
charging station in one or more of the following three
ways: Guide, Boundary Wire and Charging Station. The
factory settings are that these three search options are
automatically combined to nd the charging station as
quickly as possible but also with a minimum risk of tracks
forming.
In very complex yards e.g. with many areas joined by
narrow passages, the amount of time required to nd the
charging station is decreased by carrying out a number of
the manual setting outlined below.
The robotic lawnmower always starts the search for the
charging station using an irregular search method.
When the robotic lawnmower still cannot nd the charging
station after a specic period of irregular searching, it also
starts to search for the guide wires and after a further
period also the boundary wire to follow one of them into
the charging station instead. This time is specied in
minutes and is known as delay time.
Example:
4 minute delay for Guide 1 and Guide 2 and 11 minutes
for the boundary wire. The robotic lawnmower then
searches irregularly for 4 minutes and then also
searches for the guide wires for 7 minutes. If it has
not found a guide wire after this period, the robotic
lawnmower now also searches for the boundary loop.
It is possible of course to specify the same delay time
for both the guide wires and boundary wire, for instance
5 minutes. The robotic lawnmower then searches
irregularly for 5 minutes and when it does not nd the
charging station, it continues to search either by following
the guide wires or the boundary wire, depending on which
one it reaches rst.
In general a long delay time decreases the risk of tracks
forming (the robotic lawnmower will nd the charging
station more often through irregular searches) but gives
longer search times. A short delay time gives the opposite
effect, i.e. short search times with increased risk of tracks
forming along the guide wires and/or boundary wires.
It is also possible to test that the robotic lawnmower
can follow the guide wires and the boundary wire to the
charging station and dock with it without a problem.
1157866-26,420,430X,450X,EN_160314.indd 56 2016-03-14 16:59:25