Operation Manual

3012-1237
English - 36
USAGE
4.6 Adjusting Cutting Height
The cutting height can be varied from MIN (2 cm) to MAX
(6 cm) in nine stages.

height must be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be lowered one
step every week until the desired cutting height has been
reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting height.
To adjust the cutting height:
1. Press the STOP button to stop the robotic
lawnmower and open the hatch.
2. Press the MENU button to access the main menu.
3. Move the cursor using the arrow keys to select
Cutting height.
 Press the up arrow key to increase the cutting
height.
 Press the down arrow key to lower the cutting
height.
4. Press OK.
IMPORTANT INFORMATION

the cutting height must be set to MAX to avoid
damaging the loop wire. After this, the cutting
height can be lowered one step every week until
the desired cutting height has been reached.
1157866-26,420,430X,450X,EN_160314.indd 36 2016-03-14 16:58:54