Operation Manual

Cutting height
Cutting height
3012-1237
3012-1408
English - 46
MENU FUNCTIONS
Reset
This function resets the timer to the factory setting, where
the robotic lawnmower is allowed to operate 24 hours a
day every day.
Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day.
All week
This resets all days in the week.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day every day.
6.4 Cutting Height
The cutting height can be varied from MIN (2 cm) to MAX
(6 cm).

height must be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be reduced one
step every week until the desired cutting height has been
reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. The cutting height can
be reduced gradually once the grass has become shorter.
To increase the cutting height:
1. Use the up arrow to increase to the desired height,
or specify a number directly with the keypad.
2. Press OK
To lower the cutting height:
1. Use the down arrow to decrease to the desired
height, or specify a number directly with the keypad.
2. Press OK
1157866-26,420,430X,450X,EN_160314.indd 46 2016-03-14 16:59:10