Operation Manual

3023-019
? m
3023-018
? m
20%
30%
English - 54
MENU FUNCTIONS
Area X > How far?
Enter the distance in meters along the relevant wire from
the charging station to the location in the remote area
where the robotic lawnmower is to begin mowing.
Use the number keys to specify the distance in meters.
Tip! Use the Test function to determine how far it is to the
remote area. The distance, in meters, will be shown in
the lawnmower display when STOP is pressed. Refer to
page 55. The measured distance shown in the display
can be saved directly in chosen remote area. The existing
values will then be replaced with the new distances.
The factory setting for Automower
®
420 is 300 meters for
Guide 1.
Area X > How often?
How often the robotic lawnmower must be steered to
the remote area is selected as a proportion of the total
number of times it leaves the charging station. At all
other times, the robotic lawnmower starts to mow at the
charging station.
Select the percentage that corresponds to the size of
the remote area relative to the total working area. If the
remote area is for instance half of the total working area,

if the remote area is smaller. If more areas are used, take

Compare with the examples in see 7 Yard Examples on
page 69.
Use the number keys to specify share as a percentage.
The factory setting for Automower
®
420 is 20% for Guide 1.
Area X > Disable
With this function, the selected area settings can be
deactivated.
1157866-26,420,430X,450X,EN_160314.indd 54 2016-03-14 16:59:22