Operation Manual

English - 94
ENVIRONMENTAL INFO
Dismantling the chassis
1. Loosen all 14 screws (Torx 20).
2. Remove the guarantee seal at the point of
separation between the chassis halves on the
right-hand side.
3. Carefully lift the back edge of the upper section of
the chassis.
4. Disconnect the MMI cable from the main circuit
board and remove the upper section of the chassis.
Remove the battery
Loosen the three screws (Torx 20) holding the battery
cover in place.
Disconnect the battery connection from the main circuit
board.
Open the battery cover and remove the battery.
3020-128
3020-112
3020-113
3020-110
1157866-26,420,430X,450X,EN_160314.indd 94 2016-03-14 17:00:15