Operation Manual

English - 9

1. INTRODUCTION AND SAFETY

Transport

The original packaging should be used when

transporting Automower

over long distances.

To safely move from or within the working area:

1. Press the

STOP

button to stop the mower.

If the alarm, (see page 59) used to prevent theft,

has been activated, open the solar cell panel

using the cut-out on the back edge of the panel

and enter the first number of the PIN code.

You select the four digit PIN code when you start

the mower for the first time, see page 31.

2. Move the main switch to the

OFF

position if you

intend to carry the mower.

3. Carry the mower by the handle at the rear under

the mower. Carry the mower with the blade disc

away from the body.

Maintenance

• Inspect Automower

each week and replace any

damaged or worn parts.

Check especially that the blades and blade disc

are not damaged. Replace all blades and screws

at the same time if necessary so that the rotating

parts are balanced, see

8. Maintenance

page 66.

WARNING

When the mower is turned upside

down the main switch must always

be set to the

OFF

position.

The main switch should be set to the

OFF

position during all work on the

mower’s underframe, such as

cleaning or replacing the blades.

OFF