SERVICE I0300046 IPL, Service Tools, 2003-01 Not available as printed IPL Service Tools
1–1■ Contents – Service tools A. Handtools, general purpose B. Pressure testing tools C. Ignition system D. Carburettor, fuel pump E. Starter device F. Clutch, oil pump G. Crankcase, crankshaft H. Cylinder, piston J. Vibration damping K. Hydraulic system L. Chains M. Bevel gear N. Tractors, riders O. Workshop equipment P. Lubricants, sealants Q.
■1–2 Service tools A. Hand tools, general purpose T-handle socket wrench Socket, 8 mm Part. No. 502 50 22-01 Service tools Torx screwdriver, T20 Part. No. 502 51 67-01 T-handle wrench, set Allen key 3 mm Allen key 4 mm Allen key 5 mm Allen key 6 mm Socket 8 mm Part. No. 504 90 00-06 Z allen key 4 mm, for restricted spaces Part. No. 502 71 36-01 T-handle allen key Allen key 5 mm For all models Part. No. 502 50 64-01 T-handle allen key Allen key 6 mm For all models Part. No.
1–3■ T-handle allen key Allen key 3/16” For models: 61, 268, 272 Part. No. 502 50 57-01 T-handle socket wrench Socket 10 mm For all models Part. No. 502 50 23-01 T-handle allen key Allen key 4 mm For all models Part. No. 502 50 18-01 Allen screwdriver 3 mm For all models Part. No. 502 50 86-01 T-handle allen key Allen key 3 mm For all models Part. No. 502 50 19-01 Allen screwdriver 4 mm For all models Part. No. 502 50 87-01 Allen screwdriver 5 mm For all models Part. No.
■1–4 B. Pressure testing tools Service tools Spacer, cover (30 mm) For models: 40, 45, 49, 51, 55 Part. No. 502 54 03-01 Cover, intake For models: 281, 288 Part. No. 502 50 47-01 Pressure vacuum tester For all models Part No. 531 03 06-23 Cover, intake For model: 3120 Part. No. 502 71 38-01 Spark plug adapter For all models Part. No. 503 84 40-02 Cover, intake For models: 362, 365 Part. No. 502 54 05-01 Rubber wedge For models: General Part. No.
Cover, exhaust For model: 288 Part. No. 502 50 81-01 Cover, exhaust For models: 42, 242, 246, 250, 265, 444 Part. No. 502 50 71-01 1–5■ Spacer (35 mm) Existing carburettor screws can be used. For models: 42, 242, 246, 254, 257, 262, 61, 268, 272, 281, 288, 250 R, 265 Part. No. 502 50 45-01 Spacer, intake (94 mm) For model: 3120 Part. No. 502 71 40-01 Cover, exhaust For models: 254, 257, 262, 268, 272 Part. No. 502 50 48-01 Cover, exhaust For models: 333, 335, Part. No. 502 52 31-01 C.
■1–6 Spark plug airgap tool, 0,5mm For all models Part. No. 502 51 91-01 Flywheel removal tool (coarse thread) For all models Part. No. 504 91 08-07 Ignition unit airgap tool, 0,3mm For all models Part. No. 502 51 34-02 Flywheel removal tool (fine thread) For all models Part. No. 502 51 94-01 Ignition unit airgap tool, For model: 122 R Part. No. 531 00 48-61 Test plug For all models Part. No. 502 71 13-01 Electrical terminal kit For all models Part. No. 532 14 86-91 D.
1–7■ Carburettor repair kit For model: Walbro Part No. 531 03 01-91 Level gauge For model: Walbro Part No. 531 03 01-92 Inlet seat coining tool For model: Walbro Part No. 531 03 02-42 Pressure testing gauge For all models Part No. 501 56 27-01 Single-stage limiter cap removal tool For model: Walbro Part No. 531 03 03-98 Two-stage limiter cap removal tool For model: Walbro Part No. 531 03 05-01 Limiter cap parts pack For model: Walbro Part No.
■1–8 F. Clutch, oil pump Service tools Clutch spring installation tool For clutches with long spiral spring. Part. No. 502 50 49-01 Puller, clutch For models: 340, 345, 350, 346, 351 Part. No. 502 54 16-01 Puller For model: Horizont Part. No. 531 01 96-76 Clutch removal tool For models: 42, 242, 246 Part. No. 502 51 45-01 Clutch removal tool For models: 340, 345, 351, 346, 357, 359 Part. No. 502 52 22-02 Clutch removal tool For models: 365, 371, 372, 385 Part. No.
1–9■ G. Crankcase, crankshaft Main bearing/seal mandrel For model: 23 C Part. No. 530 03 10-32 Crankcase seal removal tool, flywheel side For models: 362, 365, 371, 372, 385, 340, 345, 350, 346, 351 Part. No. 502 50 55-01 Sealing ring mandrel For model: 23 C Part. No. 530 03 10-35 Crankcase seal removal tool, flywheel side For models: 362, 365, 371, 372, 61, 268, 272, 244, 250, 252 Part. No. 504 91 40-01 Sealing ring mandrel For models: 51, 55, 254, 257, 262 Part. No.
■ 1 – 10 Seal protector tool For models: 340, 345, 350, 346, 351 Part. No. 502 54 20-01 Crankshaft installation tool For models: 254, 262, 51, 55 Part. No. 502 50 30-10 Seal protector tool For models: 61, 66, 266, 268, 272 Part. No. 502 50 53-01 Crankshaft installation tool For models: 40, 45, 51, 55 Part. No. 502 50 30-09 Seal protector tool For models: 40, 45, 51, 55, 254, 257, 262 Part. No. 505 38 17-23 Crankshaft installation tool For models: 281, 288 Part. No.
Seal installation tool For models: 362, 365, 371, 372, 385 Part. No. 502 52 21-01 1 – 11 ■ Crankcase assembly tool For models: 346XP, 351, Part. No. 502 54 18-01 Puller for crankchaft bearing, flywheel side For model: 325HS Part. No 531 00 48-67 H. Cylinder, piston Piston stop, metal (long) For models: > 80 cc. Part. No. 502 50 33-01 Piston stop, metal (short) Part. No. 504 91 06-05 Assembly kit, piston For all models Part. No. 502 50 70-01 Piston pin installation tool For all models Part. No.
■ 1 – 12 J. Vibration damping AV spring removal tool For models: 333, 334, 335, 338, 339 Part. No. 502 52 18-01 AV rubber damper removal tool, 11 mm For models: 61, 268, 272 Part. No. 502 50 67-01 AV spring removal tool For models: 362, 365, 371, 372, 385 Part. No. 502 52 18-02 AV rubber damper removal tool, 14 mm For models: 136, 141, 42, 242, 246, 61, 268, 272, 250R Part. No. 502 51 00-02 AV rubber damper removal tool, 18 mm For models: 61, 268, 272, 288, 394, 3120 Part. No.
1 – 13 ■ K Hydraulic system O-ring installation spacer For model: 235P Part. No. 502 52 26-01 Slip ring installation tool For model: 235P Part. No. 502 52 27-01 Hydraulic system pressure gauge For model: 250PS Part. No. 502 52 28-01 Hydraulic motor drive shaft removal tool For model: 250PS Part. No. 502 52 23-01 Pressure gauge adapter For model: 235P Part. No. 502 52 30-01 Hydraulic motor installation tool For model: 250PS Part. No. 502 42 50-01 Hydraulic oil circulation hose For model: 250PS Part.
■ 1 – 14 L. Chains Chain breaker tool For: Chains Part. No. 531 01 27-11 Chain spinner tool For: Chains Part. No. 531 01 27-12 Grinding disc, 5mm, For: Chains 3/8” and .404 Part. No. 508 23 26-60 Grinding disc, 3mm, For: Chains .325 Part. No. 508 23 26-59 Chain cutting guide For: All chainsaws Part No. 640 00 04-59 M. Bevel gear Locking screw wrench For models: 250, 252 Part. No. 502 51 11-01 Locking screw tool For models: 250, 252 Part. No. 502 52 17-01 Locking screw wrench For models: 265 Part.
1 – 15 ■ N. Tractors, riders Claw spanner For: Rider 850 Part. No. 506 56 71-01 Extended Allen key, 5/16” For: Riders 1993 – 1994, Kawasaki engine Part. No. 506 56 76-01 Pulley removal tool For: Riders Part. No. 506 89 92-01 Cutting unit service tool For: RBH tractors Part. No. 531 00 57-01 Extended Allen key, 3/8” For: Riders Part. No. 506 79 06-01 Control spring removal tool For: Riders Part. No. 506 89 93-01 Rear wheel puller For: Riders Part. No. 506 57 00-01 Pulley puller For: Riders Part. No.
■ 1 – 16 O. Workshop equipment Chain saw power head holder For all models Part. No. 502 51 02-01 Brushcutter/trimmer holder For all models Part. No. 502 51 03-01 Chain sharpening machine For all models Part. No. 508 23 26-53 Rev counter For all models Part. No. 502 71 14-01 Universal puller (crankshaft bearing) For all models Part. No. 504 90 90-02 Thread insert – for repairing threads in plastic/aluminium For models: 340, 345, 346, 350, 351, 357, 359 Screw: MT6 Part. No.