Product Manual

wc_tx004128gb_FM10.fm
42
General Maintenance Walk-Behind Trowels
5 General Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by the
engine manufacturer. See the supplied engine owner’s manual for the applicable
emission warranty information.
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks
 may be performed by the operator. Tasks designated with square bullet
points  require special training and equipment.
WARNING
A poorly maintained machine can malfunction, causing injuries or permanent
damage to the machine.
► Keep the machine in safe operating condition by performing periodic
maintenance and making repairs as needed.
Daily
Every
50
hr
Every
100
hr
Check external hardware.

Clean trowel after each use to
remove concrete splatter.

Grease blade arms as needed.

Check drive belt.
