Power Cutter Operator's Manual
English – 17
STARTING AND STOPPING
• With a cold engine: The machine stops when the engine
fires becase the chokel control is pulled out.
Press the choke control and the decompression valve.
Pull the starter handle until the engine starts.
• When the engine starts, quickly apply full throttle to
automatically disengage f
ast idle.
Stopping
• Stop the engine by moving the stop switch (STOP) to the
right.
!
CAUTION! The cutting blade continues to
rotate up to a minute after the motor has
stopped. (Blade coasting.) Make sure that
the cutting blade can rotate freely until it is
completely stopped. Carelessness can
result in serious personal injury.