Operation Manual
D
B
A
C
10:2
10 Maintenance
CLEANING THE MACHINE
To keep your sewing machine operating well, clean it often.
1ROXEULFDWLRQRLOLQJLVQHHGHG
Wipe the exterior surface of your machine with a soft cloth
WRUHPRYHDQ\GXVWRUOLQWEXLOWXS
Wipe the screen with a clean, soft and damp cloth.
Cleaning the bobbin area
Note: Lower the feed teeth by pressing Presser Foot Up and
Extra Lift. Turn off the machine.
5HPRYHWKHSUHVVHUIRRWDQGVOLGHRII WKHEREELQFRYHU
3ODFHWKHVFUHZGULYHUXQGHUWKHQHHGOHSODWHDVVKRZQLQ
WKHSLFWXUHDQGJHQWO\WXUQWKHVFUHZGULYHUWRSRSRIIWKH
needle plate. Clean the feed teeth with the brush found with
the accessories.
Cleaning under the bobbin area
Clean the area under the EREELQFDVHDIWHUVHZLQJVHYHUDO
projects or any time you notice an accumulation of lint in
the bobbin case area.
5HPRYHWKHEREELQFDVHKROGHU$FRYHULQJWKHIURQWSDUW
RI WKHEREELQFDVHE\OLIWLQJLWXS5HPRYHWKHEREELQFDVH
%E\OLIWLQJLWXS&OHDQZLWKWKHEUXVK
Note: Use caution when cleaning around the Selective Thread
Cutter knife (C).
Put the bobbin case and the bobbin case holder back in
place.
Note: Do not blow air into the bobbin case area. The dust and lint
will be blown into your machine.
Note: When using the optional accessory HUSQVARNA
VIKING
®
Embroidery Cutwork Needles, it is neccessary to clean
the bobbin area after each embroidered design/project.
Replacing the needle plate
With feed teeth ORZHUHGSODFHWKHQHHGOHSODWHVRWKDWLWÀWV
LQWRWKHQRWFKDWWKHEDFN'3UHVVWKHQHHGOHSODWHGRZQ
XQWLOLWFOLFNVLQWRSODFH6OLGHRQEREELQFRYHU