Operation Manual
4 Sewing
Thread Tension control
Thread Portioning control
Needle thread
Bobbin thread
4:94:9
deLuxe
™
STITCH SYSTEM
The deLuxe
™
6WLWFK6\VWHPKDVWZRZD\VWRFRQWUROWKH
needle thread: Thread Tension and Thread Portioning.
The deLuxe
™
6WLWFK6\VWHPLPSURYHVWKHFRUUHFWEDODQFH
between needle thread and bobbin thread. It will
automatically use Thread Portioning when possible, to get
the best result.
Thread Portioning automatically and continuously
measures the fabric thickness to portion the correct
amount of thread for the selected stitch. When using
Thread Tension, the tension discs will keep the correct
amount of tension on the needle thread.
&HUWDLQRSWLRQDODFFHVVRULHVRUVSHFLDOWHFKQLTXHVPD\
UHTXLUHWKHXVHRI 7KUHDG7HQVLRQIRUEHVWUHVXOWV
'HVHOHFWdeLuxe
™
6WLWFK6\VWHPLFRQLQWKH0DFKLQH
6HWWLQJV0HQXWRVZLWFKWR7KUHDG7HQVLRQ
'HSHQGLQJRQZKLFKIXQFWLRQLVDFWLYHLQWKH0DFKLQH
6HWWLQJVWKHFRQWUROYLVLEOHLQVHZLQJHPEURLGHU\PRGH
will change. Use the controls to adjust the balance between
needle thread and bobbin thread, e.g., when using specialty
thread.
Note: When changing the Thread Tension/Portioning by using
the controls, the changes only affect the selected stitch/design. Your
changed settings will be reset to default when selecting another stitch/
design.
Adjust Thread Tension/Thread Portioning
)RUWKHEHVWVWLWFKDSSHDUDQFHDQGGXUDELOLW\PDNHVXUHWKH
WKUHDGVPHHWHYHQO\EHWZHHQWKHWZRIDEULFOD\HUV
,I WKHEREELQWKUHDGLVYLVLEOHRQWKHWRSVLGHRI WKH
fabric, the Thread Tension/Thread Portioning is too tight.
Reduce the Thread Tension/Thread Portioning.
,I WKHQHHGOHWKUHDGLVYLVLEOHRQWKHXQGHUVLGHRI WKH
fabric, the Thread Tension/Thread Portioning is too loose.
Increase the Thread Tension/Thread Portioning.
)RUGHFRUDWLYHVWLWFKHVDQGEXWWRQKROHVWKHWRSWKUHDG
VKRXOGEHYLVLEOHRQWKHXQGHUVLGHRI WKHIDEULF
Tension/Portioning Compensations
,I \RXÀQGWKDWWKHQHHGOHWKUHDGLQJHQHUDOLVWRRWLJKWRU
too loose, touch the Tension/Portioning Compensations
LFRQLQWKH0DFKLQH6HWWLQJV0HQXDQGDGMXVWWKHVHWWLQJV
ZLWKWKHVOLGHUEDUV6HHSDJH
Note: When changing the Thread Tension/Portioning by using the
Tension/Portioning Compensations in the Machine Settings Menu,
the changes affect all stitches and/or embroidery. Default setting is
Normal. The changed settings are automatically saved when turning
on your machine again.