Operation Manual

1:10

Getting to know your machine

Edging Foot J

This foot is used for overcasting and seam/overcasting, with

stitches that have a stitch width of 5.0 and 5.5 mm. Stitches form

over the pin which prevents puckering at the edge of the fabric.

Quilter’s 1/4” Piecing

foot P

This foot is used when piecing quilt blocks. The foot has distance

guidelines marks 1/4" (6 mm) and 1/8" (3 mm) from the needle.

Embroidery/Darning

Foot R

This foot is used for free motion embroidery/quilting/stitching

and hoop embroidery.

Side Motion Foot S

This foot is used for side-motion/Omnimotion stitches.

Decorative Stitch

Foot B Transparent

A clear foot for decorative sewing ma kes it easy to match stitches.

Same tunnel on the underside as Presser Foot B.

Sensor One-Step

Buttonhole Foot

Plug into the machine then enter the desired buttonhole length to

sew Sensor One-Step Buttonholes. The middle mark measures a

5/8" (15 mm) from fabric edge.

Self-Adhesive Glide

Plates

Used for Presser Foot C/Sensor One-Step Buttonhole Foot when

sewing buttonholes on plastic-coated fabrics, leather, etc.