Operation Manual

8:8
Embroidery Stitch-Out
Corner check
Corner Check can be used to trace the four corners of the
design so that you can see where the design will be on the
fabric. Touch the corner check icon. Each time you touch the
icon it will move the hoop in the following order: upper left,
upper right, lower right, lower left and then go back to the
current stitch position.
2-dimensional/3-dimensional view
toggle
In 2-dimensional view, the designs load faster on the
screen and it is easier to see the color blocks in the design.
3-dimensional view gives a more realistic view of the designs,
with added shadows and depth.
Touch the ”3D” icon to change to 3-dimensional view. The
icon becomes selected. Touch again to deselect and return to
2-dimensional view.
Zoom
Zoom In/ Out
Use to zoom in or out of the embroidery À eld. Use Zoom In
(+) to get a close-up view of an area within the embroidery
design. Use (-) to Zoom Out to view the entire design.
Zoom to Hoop/ Zoom to All
Zoom to Hoop will adjust the embroidery À eld to À t the
selected hoop. To see your design as large as possible, use
the Zoom to All function. The embroidery will À ll the entire
embroidery À eld. To close, touch the screen once.
Zoom to Box
Touch and drag your stylus in the embroidery À eld on the
screen to create a box. The screen zooms to show that speciÀ c
area.
Remaining Embroidery Time by Color
An estimation of the remaining embroidery time for the
current color block is displayed in hours and minutes in the
lower left corner of the screen.
Thread Tension Control
When embroidering with specialty thread or fabric you may
need to adjust the thread tension to achieve the best result.
Thread tension can be adjusted up or down using the + and
the - on the thread tension control.
Step Stitch-by-Stitch control
Touch + to step forward and - to step backwards stitch by
stitch. Use the - icon to move backwards a few steps after
the needle thread breaks or runs out. Touch & Hold to move
through the stitches more quickly. The cursor on the screen
will follow the stitches in the embroidery À eld.
Zoom In
Zoom to All
Zoom to Box
Zoom to Hoop
Zoom Out
Remaining Embroidery Time by
Color
2-dimensional/
3-dimensional
vie
w toggle
Corner Check
Smar
t Save
Thread Tension Control
Step Stitch-by-Stitch Control