Operation Manual

10:4
Maintenance
Bobbin thread breaks
Did you insert the bobbin properly? Check the bobbin thread.
Is the needle plate hole damaged? Change the needle plate.
Is the bobbin area full of lint? Clean lint from bobbin area and use only the original
bobbins approved for this model.
Is the bobbin wound correctly? Wind a new bobbin.
The seam has uneven stitches
Is the thread tension correct? Check needle thread tension and the threading.
Are y
ou using too thick or slubbed thread? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly as described in chapter 2.
The machine does not feed or feeds irregularly
Did you thread the machine properly? Check how the machine is threaded.
Has sewing lint collected betw
een the feed teeth? Remove the needle plate and clean the feed teeth with a
brush.
Free-Motion setting is on? Turn off Free-Motion setting in Sewing Settings in SET
menu.
The embroidery design is distorted
Is the fabric hooped properly? The fabric must be tightly hooped.
Is the inner embroidery hoop completely inserted in the
outer embroidery hoop?
Hoop the fabric in such a way that the inner hoop exactly
matches the outer hoop.
Is the area around the embroidery arm free? Clear area around the embroidery unit.
The embroidery design has puckered
Did you stabilize your fabric sufÀ
ciently? Ensure you use the proper stabilizer for your technique or
fabric type.
The machine will not embroider
Is the embroidery unit attached? Make sure that the embroidery unit is properly attached
into the soc
ket.
Is the wrong hoop attached? Slide on the correct hoop.
Have your sewing machine serviced regularly by your local authorized dealer!
If you have followed this troubleshooting information and still have problems, take your sewing machine to your dealer.
If there is a speciÀ c problem, it is a great help to test sew with your thread on a scrap of your sewing fabric and bring it
to your dealer. A sewing sample will often give much better information than words.
Non-original parts and accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.