Operation Manual

3:6
Ultimate Interactive Screen
Pan
Balance Length
Balance Width
Stitch Settings
Machine Settings
Sound Settings
Screen and Light Settings
Sewing Settings
Thread tension
Sensor Foot Pressure
SET Menu
In the SET Menu, you can override automatic settings and
make personal adjustments to the Stitch Settings, Sewing
Settings, Machine Settings, Sound Settings and Screen and
Light Settings.
Touch the icons to activate a function or open a list of
choices. When changing the Machine, Sound or Screen
and Light Setting, the settings are saved after turning off
the machine. If you make changes to Stitch Settings, the
changes will not be saved after turning off the machine.
Stitch Settings (only active in Sewing
mode)
In the Stitch Settings screen, you can set the thread tension,
presser foot pressure and balance a stitch or buttonhole.
These settings will only be valid for the stitch that is
currently selected.
If another stitch is selected or the same stitch is selected
again, the stitch value is reset to the default value.
Thread tension
Touch + to increase, and - to decrease top thread tension
for different specialty threads, specialty techniques or
speciÀ c fabric. Read more about thread tension in the
Sewing chapter. Default number is black.
Sensor Foot Pressure
In Sewing Mode, touch + to increase or - to decrease
pressure from the presser foot on fabric.
Balance controls
When sewing on special fabrics or doing a specialty
technique, the balance of the stitch may need to be
adjusted.
Start by sewing a stitch on a piece of scrap fabric with
stabilizer underneath. In the SET Menu, select Stitch
Settings. Change the picture of the stitch on the screen to
match your sewn sample, using the + and - icons. Make the
stitch on the screen look like your unbalanced stitch-out.
Now when you sew again on the same fabric, the balance
will be corrected. The machine will balance the stitch for
you.
Note: Use the Pan icons. The Pan feature lets you see the whole stitch.