Operation Manual

3:8
Ultimate Interactive Screen
Sensor Presser Foot Lift
When selected, the Sensor Presser Foot Lift is activated.
The presser foot will raise to pivot height for example
when stopping to sew with the needle in the down position.
When deselected, the presser foot will stay lowered even if
the machine stops with the needle in down position or after
a thread cut.
FIX Auto
When the FIX Auto is activated, the machine will begin a
stitch with FIX stitches. If it is not activated use the FIX
button on the front of your machine to À x your stitch or to
cancel the FIX at the beginning of a stitch.
Free-Motion Floating
Activate to set the machine in Free-Motion Floating mode
for presser foot R. The feed teeth will lower automatically.
When sewing free-motion at low speed the presser foot
will raise and lower with each stitch to hold the fabric on
the needle plate while the stitch is being formed. At higher
speed, the presser foot Á oats over the fabric while sewing.
The fabric must be moved manually.
To adjust the presser foot height in Free-Motion Floating
mode, touch the Presser Foot height control to make
adjustments.
Free-Motion Spring Action
Select Free-Motion Spring Action to activate the Free
motion spring action mode. The feed teeth will lower
automatically. A spring action foot will raise and lower with
each stitch to hold the fabric on the needle plate while the
stitch is being formed. The fabric must be moved manually.
If you are using the Sensor Q-foot activate Free-Motion
Spring Action and Stitch Width Safety.
Note: The Open Toe Free-Motion Spring foot is optional and can be
purchased at your local authorized dealer. Do not use if Free-Motion
Floating is selected, to prevent damage to the presser foot.
Presser Foot Height
Control (Free Motion
Floating)
Presser Foot Height
for Embroidery