Operation Manual

4:74:7
Sewing
Stitch Width
Decrease or increase the stitch width using -and +. Default
settings are shown in black numbers, adjusted settings in
red.
Stitch Length
Increase or decrease the stitch length using + and -. If
lengthening a zigzag stitch or a decorative stitch, the entire
stitch will be longer. If lengthening a satin stitch where the
density can be adjusted, the entire stitch will be longer but
the density will remain the same.
Note: The set stitch width and the stitch length are shown between
the + and -. When trying to exceed minimum or maximum settings
for width and length, a warning sound will be heard.
The default setting is shown in black. Changed settings are shown in
red.
Button size
When sewing a buttonhole with the Sensor One-Step
buttonhole foot, you can set the button size. Measure your
button and enter the button size in the button size control.
Button Sew On
When sewing a button, you can set the number of stitch
repeats. Touch the + or -to increase or decrease the
number of stitch repeats (see 4:17).
Stitch density
The stitch density control adjusts the density (the distance
between the individual satin stitches that make up the
entire stitch). The density does not affect the actual length
of the entire stitch.
Touch + to increase the value. Touch - to decrease the
value.
Note: This is often used with specialty threads and when a less dense
satin stitch is desired.
Mirroring
To mirror stitches or stitch programs sidewise touch
Mirror Side-to-Side icon. For mirroring the stitch or stitch
programs lengthwise touch Mirror End-to-End icon.
Stitch length +Stitch length -
Stitch density -Stitch density +
Mirror End-to-End
Mirror Side-to-Side