Operation Manual

7
4:154:15
Sewing
Perfectly Balanced Sensor One-Step
Buttonhole
The Exclusive SEWING ADVISOR™ feature will select
the best buttonhole and stitch settings for your fabric.
Fabric should be interfaced and/or stabilized where
buttonholes are to be sewn.
You can also select your buttonhole directly from the
Buttonhole Menu B.
FABRIC: Woven medium and stabilizer.
SELECT: Woven medium fabric and Buttonhole.
USE: Size 80 needle as recommended.
1. Snap on the Sensor One-Step Buttonhole Foot.
2. Plug the cord into the socket to the left underside in
front of the Adjustable E LIGHT™ system(a).
3. Place your button on the buttonhole ruler on the
baseplate.
4. Set the size of the button in mm on your screen.
Before sewing, line up the white area on the side of the
wheel with the white marking line on the foot.
When sewing, your machine automatically sews the
buttonhole long enough to À t the selected button size.
The buttonhole size needed will vary with the thickness
and style of your button. Always stitch a sample
buttonhole on scrap fabric À rst.
Note: For woven heavy and leather, the Exclusive SEWING
ADVISOR™ feature selects buttonholes that should not be sewn
with the Sensor One-Step Buttonhole Foot.
Sew the buttonhole:
• Fold fabric in two and place stabilizer underneath.
• Mark the buttonhole placement on your fabric with
your Pictogram Pen. Set the length of the buttonhole.
• Place fabric under Sensor One-Step Buttonhole Foot.
The measurement wheel can be raised by lifting it,
which makes it easier to place the fabric under the
presser foot.
Note: Use the markings on the left toe of the Sensor One-Step
Buttonhole Foot to position the garment edge. Place the edge of the
garment at the middle mark to have 5/8’’ (15 mm) from the edge to
the buttonhole.
Place fabric edge here to place
buttonhole 5/8'' (15 mm) from edge.
(a)
Sensor One-Step Buttonhole
Foot socket.