Operation Manual

7:10
Embroidery Edit
Edit Stitch Program
If you touch the Edit Stitch Program icon, a window
will open so you can edit a stitch program that you have
created. You can insert new stitches or delete stitches. If
you have programmed stitches in Embroidery Mode, you
can save the stitches as a part of a design, and they can only
be stitched in embroidery mode.
To save a stitch program in Embroidery Mode
Touch the Start Menu, touch the Stitch Menu. Program
your stitch and touch OK in the lower right corner of the
screen. You will now go back to Embroidery Edit. Touch
the Save to My Designs icon to save the stitch program in
My Designs. A stitch program made in Embroidery Mode
will not be able to open in the sewing mode.
Read more about how to program a stitch in chapter 5.
Full Screen
To see your design as large as possible, use the Full Screen
function.The embroidery will À ll the entire screen. To close,
touch the screen once.
2-dimensional/3-dimensional view
toggle
In 2-dimensional view, the designs load faster on the
screen and it is easier to see the color blocks in the design.
3-dimensional view gives a more realistic view of the
designs, with added shadows and depth.
Touch the ”3D” icon to change to 3-dimensional view. The
icon becomes selected. Touch again to deselect and return
to 2-dimensional view.
Zoom
Zoom
Zoom in or out of the embroidery À eld. Use Zoom In (+)
to get a close-up of an area within the embroidery design.
Use (-) to Zoom Out.
Zoom to Hoop/Zoom to All
Zoom to Hoop will adjust the embroidery À eld to À t the
selected hoop. Zoom to All will show all the design(s) in
the embroidery combination.
Zoom to Box
Touch and drag your stylus in the embroidery À eld on the
screen to create a box. The screen zooms to show that
speciÀ c area.
Note: As you Zoom In your design gets very large. To locate a speciÀ c
part of your design touch Pan. Touch and drag or use the control
arrows to À nd the part you wish to work with.
Zoom In Zoom Out
Zoom to
Hoop
Zoom to All
Zoom to
Bo
x