Operation Manual
SettingS & FunctionS 3:7
Automatic Jump Stitch Trim
the machine will trim the top jump stitch thread and pull
the thread end to the underside of the fabric.
Note: The machine will also cut the thread after you have changed to
a new color. Hold the thread end when you start embroidering again,
so that you can easily remove the thread end when cut.
Trim. Jump stitch trim commands can be added to any
™
design includes trim commands you can open
™
command symbol.
Note: If the front and back of your embroidery will be visible, turn
off the Automatic Jump Stitch Trim and cut the threads manually.
Sensor Presser Foot Lift
when stopping to sew with the needle in the down position.
the machine stops with the needle in down position or after
a thread cut.
FIX Auto
cancel the FIX at the beginning of a stitch.
Feed Teeth Options
Touch to open a pop-up with three options.
automatically raises or lowers the feed teeth, depending on
the stitch selected. For example, the feed teeth are lowered
when sewing on buttons, or when doing free-motion
sewing and embroidery. The feed teeth are also lowered
a new stitch is selected, the feed teeth are automatically
raised again when you start sewing.