Operation Manual
CONTENTS
English
–
3
Contents
Note the f
ollowing before
starting:
Please read the oper
ator’s manual carefully and make
sure you understand the instructions before using the
machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
The machine is designed only to dethatch lawns from
moss.
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the dethacher?
........................... 5
SAFETY INSTR
UCTIONS
Machine
′
s safety equipment ................................. 6
Personal protective equipment ............................. 6
General safety precautions ................................... 7
General working instructions ................................ 7
ASSEMBLY
Assembling the dethatcher accessory .................. 9
MAINTENANCE
Maintenance schedule ......................................... 11
TECHNICAL DATA
Technical data ...................................................... 12
EC Declaration of Conformity ............................... 12
!
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING! This accessory may only be
used together with the intended brush
cutter/trimmer, see under heading
”Approved accessories” in chapter
Technical data in the machine’s
Operator’s Manual.