Operation Manual

ASSEMBLY

English – 9

Assembling the dethatcher

accessory

The arrow on the gear housing indicates the direction of

rotation. The gear housing is to be placed as illustrated.

1 Press the left moss dethatcher (A) onto the left drive

shaft from the gear housing (E).

2 Fasten the moss dethatcher roller with split pin (B) into

the

outer hole in the shaft.

IMPORTANT! The moss dethatcher rollers are marked

with arrows showing the direction of the rotation. Make

sure the moss dethatcher rollers are ﬁtted correctly. The

moss dethatcher rollers must be ﬁtted slightly displaced

in relation to each other.

The moss dethatcher springs should point in the same

direction as the rotation direction arrow shown on the

gear housing.

ABC