Operation Manual

34
2 Place right sides of the fabric
together. Sew a seam from the
bottom 2 cm (5/8”) from the
right edge to the end of the zipper
opening. Sew a few stitches in
reverse to lock. Increase the stitch
length to “4”, set needle thread
tension to “1”, and baste the length
of the zipper opening.
j 2 cm (5/8”)
k Basting
l Reverse stitch
m End of the opening
n Straight stitch
To sew
1 Snap on the zipper foot with the bar
on the right side. Turn under the
right seam allowance to form a 0.4
cm (1/8”) fold.
a Lower layer
b End of opening
c Zipper teeth
d 0.4 cm margin
e Wrong side of the fabric
f Opening size
g Fold
h Basting stitch line
2 Place zipper teeth next to the fold
and pin in place. Align the zipper
foot with the fold. Return thread
tension and stitch length to original
settings. Sew a seam the entire length
of zipper tape, removing pins as you
go.
j
k
l
m
n
a
b
c
d
e
f
g
h
c
e
2
1
2