Operation Manual

40
Care and
maintenance
Turn off the power switch.
Do not dismantle the machine other
than as explained in this section. Clean
the outside of the machine with a soft
cloth and mild soap.
Cleaning the Hook Assembly
area and Feed Teeth
1 Remove the presser foot and needle.
Remove screw on the left side of
the needle plate with the screwdriver
supplied with the machine. Remove
the needle plate and take out the
bobbin.
a Screw
2 Lift up the bobbin case and remove
it.
3 Brush out dust and lint.
4 Clean the feed teeth and hook
assembly area with the lint brush.
5 Wipe out gently with a soft, dry
cloth.
NOTE: You may also use a vacuum
cleaner.
a
1
2
3
4
5