Saw User Manual
Table Of Contents
- DECLARATION OF CONFORMITY WITH THE “MACHINES” DIRECTIVE
- Table of Contents
- WARNINGSDO’s AND DO NOT’s
- Symbol Definitions
- General Information
- Technical Data - Sound Level, EMC, and HAV
- DECALS & LOCATIONS
- FS6600 DIESEL SPECIFICATIONS
- SPECIAL INSTRUCTIONS
- Husqvarna FS 6600 D / FS 8400 D, 3 Speed Gearbox Models
- ENGINE INFORMATION
- PreRE OperationPERATION ChecHECklistLIST
- ScheduledCHEDULED MaintenanceAINTENANCE QuicUICk ReferenceEFERENCE
- 1. Uses
- 2. Moving The Machine
- 3 Transport (Blade Removed)
- 4 Check Before Starting
- 5 Fitting The Blade
- 6 Starting The Saw
- 7 Stopping The Saw
- 8 Incidents During Sawing
- 9 Adjustments: Straight Line Sawing
- 10 Maintenance
- 11 Blade Shaft V-Belt Tension
- 12 Hydraulic System
- 13 Important Advice
- 14 Engine / Blade Shaft / Gearbox Speed Adjustment
- 15 Accessories
- 16 Large Diameter Models
- 17 Repairs
- 18 Spare Parts
- FS6600 DIESEL - BLADE SIZE CONVERSION CHART
- Diagram 1: Wiring Diagram - FS6600 - FS8400 Instrument and Control Box
- Diagram 2: Wiring Diagram - FS6600 - FS8400 Engine Wiring
- Diagram 3: Wiring Diagram - FS6600 - FS8400 Cowl Wiring
- Diagram 4: Ladder Diagram - FS6600 - FS8400 Electrical
50
6A. LIFTING BAIL: The saw can be lifted from this
point.
6B. OIL LEVEL CHECK: Dipstick indicates oil level.
Also an oil ll location.
6C. BELT GUARDS AND SHIELDS: Protects engine,
guards, drives, and cooling fan.
6D. FRONT GUIDE: Use to locate the path of the
diamond blade on the cutting line.
DO NOT OPERATE ENGINE WITH SHIELDS
REMOVED!
6E. FAN SHIELDS: Protects engine, cooling fan,
beltdrives and pulleys.
6F. REAR GUIDE: Use to locate the path of the
diamond blade on the cutting line.
6G. HANDLEBARS: Used to maneuver the saw. Not
to be used to lift the saw.
6H. ENGINE OIL FILTER: The Oil lter element needs
to be changed when changing oil. (100 hr)
FIGURE 6
5L. ENGINE OIL DRAIN HOSE: Connects to oil drain
valve 3I. Use to drain engine oil.
5M. TRANSMISSION BYPASS VALVE: Turn counter
clockwise to open. Turn clockwise to close. Open
to push concrete saw.
5N. HYDROSTATIC TRANSMISSION PUMP.
5O. ALTERNATOR/WATERPUMP BELT: Self
Tensioning. See JohnDeere for replacements.
5P. ALTERNATOR: See John Deere for replacements.