Saw User Manual
Table Of Contents
- DECLARATION OF CONFORMITY WITH THE “MACHINES” DIRECTIVE
- Table of Contents
- WARNINGSDO’s AND DO NOT’s
- Symbol Definitions
- General Information
- Technical Data - Sound Level, EMC, and HAV
- DECALS & LOCATIONS
- FS6600 DIESEL SPECIFICATIONS
- SPECIAL INSTRUCTIONS
- Husqvarna FS 6600 D / FS 8400 D, 3 Speed Gearbox Models
- ENGINE INFORMATION
- PreRE OperationPERATION ChecHECklistLIST
- ScheduledCHEDULED MaintenanceAINTENANCE QuicUICk ReferenceEFERENCE
- 1. Uses
- 2. Moving The Machine
- 3 Transport (Blade Removed)
- 4 Check Before Starting
- 5 Fitting The Blade
- 6 Starting The Saw
- 7 Stopping The Saw
- 8 Incidents During Sawing
- 9 Adjustments: Straight Line Sawing
- 10 Maintenance
- 11 Blade Shaft V-Belt Tension
- 12 Hydraulic System
- 13 Important Advice
- 14 Engine / Blade Shaft / Gearbox Speed Adjustment
- 15 Accessories
- 16 Large Diameter Models
- 17 Repairs
- 18 Spare Parts
- FS6600 DIESEL - BLADE SIZE CONVERSION CHART
- Diagram 1: Wiring Diagram - FS6600 - FS8400 Instrument and Control Box
- Diagram 2: Wiring Diagram - FS6600 - FS8400 Engine Wiring
- Diagram 3: Wiring Diagram - FS6600 - FS8400 Cowl Wiring
- Diagram 4: Ladder Diagram - FS6600 - FS8400 Electrical
9
*****************
This saw was designed for certain applications only. DO NOT modify this saw or use for any application other
than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until
you have written Husqvarna Construction Products and we have advised you.
Husqvarna Construction Products North America
17400 West 119th Street
Olathe, Kansas 66061
USA
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
SAFETY FIRST!
WARNINGS
DO’s AND DO NOT’s
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT