Saw User Manual
Table Of Contents
- DECLARATION OF CONFORMITY WITH THE “MACHINES” DIRECTIVE
- Table of Contents
- WARNINGSDO’s AND DO NOT’s
- Symbol Definitions
- General Information
- Technical Data - Sound Level, EMC, and HAV
- DECALS & LOCATIONS
- FS6600 DIESEL SPECIFICATIONS
- SPECIAL INSTRUCTIONS
- Husqvarna FS 6600 D / FS 8400 D, 3 Speed Gearbox Models
- ENGINE INFORMATION
- PreRE OperationPERATION ChecHECklistLIST
- ScheduledCHEDULED MaintenanceAINTENANCE QuicUICk ReferenceEFERENCE
- 1. Uses
- 2. Moving The Machine
- 3 Transport (Blade Removed)
- 4 Check Before Starting
- 5 Fitting The Blade
- 6 Starting The Saw
- 7 Stopping The Saw
- 8 Incidents During Sawing
- 9 Adjustments: Straight Line Sawing
- 10 Maintenance
- 11 Blade Shaft V-Belt Tension
- 12 Hydraulic System
- 13 Important Advice
- 14 Engine / Blade Shaft / Gearbox Speed Adjustment
- 15 Accessories
- 16 Large Diameter Models
- 17 Repairs
- 18 Spare Parts
- FS6600 DIESEL - BLADE SIZE CONVERSION CHART
- Diagram 1: Wiring Diagram - FS6600 - FS8400 Instrument and Control Box
- Diagram 2: Wiring Diagram - FS6600 - FS8400 Engine Wiring
- Diagram 3: Wiring Diagram - FS6600 - FS8400 Cowl Wiring
- Diagram 4: Ladder Diagram - FS6600 - FS8400 Electrical
92
FS6600 DIESEL - BLADE SIZE CONVERSION CHART
Note: Bladeshaft Spacers & V-Belt changes after Feb. 2005, S/N: 428033
05.03.05
Size To Convert To
Size To
Convert
From
14” / 18"
(350mm / 450mm)
26"
(650mm)
30"
(750mm)
14”
(350mm)
&
18”
(450mm)
No Conversion Required; configured:
- Blade Guard 2” Wide Slip-On – 18” US
- Blade Guard 3” Wide Slip-On – 18” EU
- (1) Spade & Spacer
- (2) Bladeshaft Pulley 8G3VX4.12” OD
- (2) Engine Pulley, 8G3VX4.75” OD
- Flanges, 5.00” OD
- Before Feb 2005
:
(4) V-Belt 3VX430 4-Band
- After Feb 2005:
(4) V-Belt 3VX465 4-Band
542 19 81-64 Blade Guard 3” Wide S/O
542 19 94-67 Bladeshaft Assy 26/30"
542 19 18-95 (2) Eng Pulley 8G 4.12” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-65 Blade Guard 3” Wide S/O
542 19 94-67 Bladeshaft Assy 26/30”
542 16 63-66 (2) Eng Pulley 8G 3.65” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 63-62 (4) V-Belt 3VX450 4-Band
26"
(650mm)
542 19 81-63 Blade Guard 2” Wide S/O-US
542 19 97-78 Blade Guard 3” Wide S/O-EU
542 19 94-66 Bladeshaft Assy 18”
542 16 63-65 (2) Eng Pulley 8G 4.75" OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
No Conversion Required; configured:
- Blade Guard 3” Wide Slip-On -26”
- (1) Spade & Spacer
- (2) Bladeshaft Pulley 8G3VX4.75” OD
- (2) Engine Pulley, 8G3VX4.12” OD
- Flanges, 5.00" OD
- Before Feb 2005
:
(4) V-Belt 3VX430 4-Band
- After Feb 2005:
(4) V-Belt 3VX465 4-Band
542 19 81-65 Blade Guard 3” Wide S/O
542 16 63-66 (2) Eng Pulley 8G 3.65” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 63-62 (4) V-Belt 3VX450 4-Band
30"
(750mm)
542 19 81-63 Blade Guard 2” Wide S/O-US
542 19 97-78 Blade Guard 3” Wide S/O-EU
542 19 94-66 Bladeshaft Assy 18”
542 16 63-65 (2) Eng Pulley 8G 4.75" OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-64 Blade Guard 3” Wide S/O
542 19 18-95 (2) Eng Pulley 8G 4.12” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
No Conversion Required; configured:
- Blade Guard 3” Wide Slip-On – 30”
- (1) Spade & Spacer
- (2) Bladeshaft Pulley 8G3VX4.75” OD
- (2) Engine Pulley 8G3VX3.65” OD
- Flanges, 5.00” OD
- Before Feb 2005:
(4) V-Belt 3VX430 4-Band
- After Feb 2005:
(4) V-Belt 3VX450 4-Band
36"
(900mm)
542 19 81-63 Blade Guard 2” Wide S/O-US
542 19 97-78 Blade Guard 3” Wide S/O-EU
542 19 94-66 Bladeshaft Assy 18”
542 16 63-65 (2) Eng Pulley 8G 4.75" OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-64 Blade Guard 3” Wide S/O
Note: Remove Rear Slip-On Spade to allow
attachment of 26” Guard.
542 19 94-67 Bladeshaft Assy 26/30"
542 19 18-95 (2) Eng Pulley 8G 4.12” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-65 Blade Guard 3” Wide S/O
Note: Remove Rear Slip-On Spade to allow
attachment of 30” Guard.
542 19 94-67 Bladeshaft Assy 26/30”
542 16 63-66 (2) Eng Pulley 8G 3.65” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 63-62 (4) V-Belt 3VX450 4-Band
42"
(1000mm)
542 19 81-63 Blade Guard 2” Wide S/O-US
542 19 97-78 Blade Guard 3” Wide S/O-EU
542 19 94-66 Bladeshaft Assy 18”
542 16 63-65 (2) Eng Pulley 8G 4.75" OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-64 Blade Guard 3” Wide S/O
542 19 93-62 Blade Guard Attachment Kit
542 19 94-67 Bladeshaft Assy 26/30"
542 19 18-95 (2) Eng Pulley 8G 4.12” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 66-29 (4) V-Belt 3VX465 4-Band
542 19 81-65 Blade Guard 3” Wide S/O
542 19 93-62 Blade Guard Attachment Kit
542 19 94-67 Bladeshaft Assy 26/30”
542 16 63-66 (2) Eng Pulley 8G 3.65” OD
Before Feb 2005:
542 16 63-63 (4) V-Belt 3VX430 4-Band
After Feb 2005:
542 16 63-62 (4) V-Belt 3VX450 4-Band