Specifications

Issued by: Therese Berg
Issued date: 211123
2 (8)
2 Europe
2.1 Robotic mower
Make sure the robotic mower system is verified with appropriate EMC and radio
standards covering at least output power, spurious emission and receiver sensitivity (i.e.
blocking).
2.2 Manual and other documentation
The manual of the mower system shall state the frequency and output power of the radio
signals.
3 USA and Canada
The boards incorporating Bluetooth have FCC and ISED approvals according to 47 CFR
Part 15.247 and RSS 247/Gen. The boards are marked with the following FCC and IC
IDs:
Table 1:
Board id
FCC ID
PMN
IC ID
582 87 12
ZASHQ-BLE-1A
HMI Board Type 10
HMI Board Type 11
HMI Board Type 12
HMI Board Type 14
23307-HQBLE1A
590 11 35
ZASHQ-BLE-1B
HMI Board Type 13
23307-HQBLE1B
591 10 05
ZASHQ-BLE-1C
Application Board
Type 1
23307-HQBLE1C
598 01 59
ZASHQ-BLE-1D
Base Station Board
Type 1
23307-HQBLE1D
597 42 75
ZASHQ-BLE-1E
Charging Station
Board Type 34
23307-HQBLE1E
597 56 22
ZASHQ-BLE-1F
Application Board
Type 2
23307-HQBLE1F
597 97 76
ZASHQ-BLE-1G
Application Board
Type 3
23307-HQBLE1G
598 98 28
ZASHQ-BLE-1H
Application Board
Type 4
23307-HQBLE1H
598 91 35
ZASHQ-BLE-1J
Main Board Type 15
23307-HQBLE1J
3.1 Robotic mower
The designs mentioned in Table 1 above are certified as limited modular approvals due to
the design is without shielded RF-circuit. Therefore shall the radio characteristics be
verified on the robotic lawn mower. This check can be done as a spot check with the
mower in a typical configuration to verify fundamental frequency and spurious emissions
according to applicable rules as mentioned above.