Operation Manual

9
a
b
c
Learn your Interlude
Bobbin Winding – Vertical
Spool Pin
1 Place an empty bobbin with the mark
out-wards on the bobbin spindle
and bring it down.
2 Place the large spool holder under
the thread on the spool pin.
3 Bring the thread under the thread
guide (a) and over thread guide (b),
further under thread guide (c).
4 From above wind a few turns of
thread around the bobbin and into
the knife.
5 Press the foot control. When the
bobbin winding is fi nished, remove
the bobbin, cut off the thread and
bring the bobbin spindle up.