User's Manual

2
1. Read this owners manual and your vehicle and im ple ment
owners manuals before using this hitch.
2. Do not allow children to operate vehicle or sleeve
hitch.
3. Do not allow adults to operate the vehicle or sleeve hitch
without proper instructions.
4. Do not allow anyone to ride on sleeve hitch.
5. Always place sleeve hitch in lowered position when
attaching an implement.
6. Before lowering and operating the implement, be sure
no one is near the area of operation.
7. Lower the sleeve hitch and implement when leav ing
ve hi cle un at tend ed.
8. Vehicle braking and stability may be affected. Drive slow ly
when sleeve hitch and implement are in raised po si tion.
Stay off of steep slopes.
9. Keep all nuts and bolts tight and be sure the equip ment
is in safe operating condition.
A 2 Hex Bolt, 5/8" x 2"
B 2 Hex Bolt, 5/8" x 1-3/4"
C 4 Hex Bolt, 3/8" x 1-1/4"
D 1 Hex Bolt, 5/16" x 1"
E 4 Carriage Bolt, 3/8" x 1"
F 3 Clevis Pin
G 2 Jam Nut, 5/8"
H 2 Nylock Nut, 5/8"
I 1 Nylock Nut 5/16"
A 2 Hex Bolt, 5/8" x 2"
B 2 Hex Bolt, 5/8" x 1-3/4"
C 4 Hex Bolt, 3/8" x 1-1/4"
D 1 Hex Bolt, 5/16" x 1"
E 4 Carriage Bolt, 3/8" x 1"
F 3 Clevis Pin
G 2 Jam Nut, 5/8"
H 2 Nylock Nut, 5/8"
I 1 Nylock Nut 5/16"
A 2 Hex Bolt, 5/8" x 2"
B 2 Hex Bolt, 5/8" x 1-3/4"
C 4 Hex Bolt, 3/8" x 1-1/4"
D 1 Hex Bolt, 5/16" x 1"
E 4 Carriage Bolt, 3/8" x 1"
F 3 Clevis Pin
G 2 Jam Nut, 5/8"
H 2 Nylock Nut, 5/8"
I 1 Nylock Nut 5/16"
KEY QTY. DESCRIPTION
KEY QTY. DESCRIPTION
KEY QTY. DESCRIPTION
KEY QTY. DESCRIPTION
KEY QTY. DESCRIPTION
J 4 Nylock Nut, 3/8"
J 4 Nylock Nut, 3/8"
J 4 Nylock Nut, 3/8"
K 4 Hex Nut, 3/8"
K 4 Hex Nut, 3/8"
K 4 Hex Nut, 3/8"
L 4 Lock Washer, 3/8"
L 4 Lock Washer, 3/8"
L 4 Lock Washer, 3/8"
M 2 Flat Washer, 3/8"
M 2 Flat Washer, 3/8"
M 2 Flat Washer, 3/8"
N 1 Spacer
N 1 Spacer
N 1 Spacer
O 1 Spacer Plate
O 1 Spacer Plate
O 1 Spacer Plate
P 3 3/32" Hair Cotter Pin
P 3 3/32" Hair Cotter Pin
P 3 3/32" Hair Cotter Pin
Q 1 5/32" Hair Cotter Pin
Q 1 5/32" Hair Cotter Pin
Q 1 5/32" Hair Cotter Pin
NOTE:
Bolt (C), Lock Washer (L) and Nut (K) will not be
used unless the mounting holes in the tractor do not already
contain bolts and nuts.
A B
D
E
C
H
J
F
G
K
L
M
N
I
O
Q
P
SAFETY RULES
HARDWARE PACKAGE
(SHOWN FULL SIZE)