Operators Manual

English-17
PRESENTATION
Cutting Height Adjustment Lever
Using the cutting height lever, the cutting height can be
adjusted between seven different positions.
It is important that the air pressure in both front wheels
is equal, 60 kPa / 0.6 bar / 9 PSI, to produce an even
cutting height.
Lever for Hydraulic Lift of Attachments
The lifting lever is used to put the cutting unit in either
the transport or mowing position when hydraulic
pressure is available.
When the lever is moved to the transport position, the
blade brake is automatically activated so that the
blades stop within about 5 seconds.
Lifting the Cutting Unit (Transport Position)
Pull the lever backwards to engage the transport
position.
The unit is raised and the blades stop rotating.
Secure the cutting unit if necessary using the
mechanical lifting lever.
Lowering the Unit (Mowing Position)
If the cutting unit is secured in the transport position
using the mechanical lifting lever, move the mechanical
lifting lever to the cutting position.
Move the hydraulic lifting lever forwards to engage the
cutting position. The unit is lowered and the blades
begin to rotate.
In order to ensure that the hydraulic cylinder is in the
outer position, hold the lever in the forward position for
a half to one second.
8009-557
8009-536
Raising the cutting unit with the hydraulic lifting lever
8009-538
Lowering the unit with the hydraulic lifting lever