Operators Manual

English-19
PRESENTATION
Parking Brake
The parking brake is activated as follows:
1. Press down the parking brake pedal.
2. Completely depress the lock button on the
steering servo housing.
3. Release the parking brake pedal while keeping the
button pressed in.
The parking brake lock is automatically disengaged
when the brake pedal is pressed down.
Seat
The seat has a hinged mounting on the front edge and
can be folded forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under the front
edge of the seat is moved to the left, after which the
seat can be moved backwards or forwards to the
desired position.
The seat springs can be adjusted by moving the rubber
blocks in their brackets on the underside of the seat.
Set both blocks in the front, centre or rear positions.
Refuelling
The engine shall be run on a minimum of 87-octane
unleaded petrol (no oil mix). It can be beneficial to use
environmentally adapted alkylate petrol. See also
”Technical Data” concerning methanol and ethanol
fuels.
Do not fill the tank completely, leave an expansion area
of at least 2.5 cm (1").
8009-328
8009-602
8009-491
8009-330
WARNING!
Petrol is highly flammable. Observe
caution and fill the tank outdoors, (see
the Safety Instructions).