Operators Manual

English-20
PRESENTATION
Clutch Control
AWD models have separate clutch controls for forward
and rear axles.
The clutch controls are used to move the Rider when
the engine is not running.
Pull the controls to the end positions, do not use an
intermediate position.
Rear Axle
The control is positioned on the inside of the left rear
wheel.
• Forward control (pulled out), drive system
disengaged.
• Rear control (pushed in), drive system engaged.
Front Axle
The control is positioned on the inside of the left front
wheel.
• Rear control (pulled out), drive system disengaged
• Front control (pushed in), drive system engaged.
Chronometer
The chronometer shows how many hours the engine
has been running. Any time when the engine is not
running but the ignition is switched on is not registered.
The last digit shows tenths of an hour (6 minutes).
8009-690
Rear axle
8009-700
Front axle
8009-567