Operators Manual

English-26
DRIVING
3. Select the required cutting height (1-7) using the
cutting height lever.
4. Depress the lock button on the mechanical lifting
lever and move the lever to its most forward
position. The cutting unit lowers and starts.
5. If the cutting unit does not lower completely, or if
the blades do not rotate, lower the cutting unit
completely using the hydraulic lifting lever.
In order to ensure that the hydraulic cylinder is in
the outer position, hold the lever in the forward
position for a half to one second.
Braking
Release the drive pedals. The machine slows and is
stopped by the drive system. Do not use the parking
brake as the drive brake.
Quicker braking is possible if you press down the drive
pedal for the opposite direction.
8009-539
8009-537
8009-538