Operators Manual
Table Of Contents
English-29
MAINTENANCE
Maintenance
Maintenance Schedule
The following is a list of maintenance procedures that
must be performed on the Rider. For points marked with
footnote numbers 4 or 5, turn to an authorised service
representative.
● = Described in this manual.
❍= Not described in this manual.
Maintenance Page Daily
main-
tenance
Weekly
3
main-
tenance
At
least
once
a year
Maintenance
interval in hours
Check for fuel and oil leaks - ❍
Check the parking brake 37 ●
Check the engine’s oil level (every
refuelling)
65 ●●
Check the fuel pump’s air filter 40 ●
Check the safety switch, seat 43 ●
Check the safety switch, lifting lever 43 ●
Check the safety switch, pedal system 43 ●
Check/clean the engine’s cooling air
intake
33 ●●
Check the cutting unit: 48 ●
• attaching the blades 50 ●
• condition of the blades (sharpness,
shape, etc.)
50 ●
Check the steering cables (any play,
etc.)
34 ●
Check fastenings (screws, nuts, etc.) - ❍
Start the engine and blades, listen for
unusual sounds
23 ●
Clean under the cutting unit 49 ●
Clean the transmission’s cooling air
intake
34 ●●
Inspecting the muffler 35 ●
Check the battery’s acid level 41 ●
Check the transmission oil level 70 ●
Check the condition of belts, belt
pulleys, etc.
- ❍
Check for damage - ❍
b
efore after
25 50 100 300