Operators Manual
Table Of Contents
English-30
MAINTENANCE
Check the air pressure in the tyres
(60 kPa)
41 ●
Clean thoroughly around the engine - ❍
Clean thoroughly around the
transmission
- ❍
Clean around all belts, belt pulleys, etc. 62 ●
Lubricate the right rear wheel bearings 69 ●
Lubricate the driver seat 67 ●
Lubricate all cables 62 ●
Lubricate the safety catch in the cutting
unit
67 ●
Lubricate the interior plug in the cutting
unit
67 ●
Lubricate the groove for the cutting
unit’s equipment frame
67 ●
Lubricate links in the cutting unit 67 ●
Clean the frame tunnel - ❍
Lubricate the pedal mechanism in the
frame tunnel
63 ●
Lubricate the hydrostatic cable 67 ●
Lubricate the parking brake cable 64 ●
Lubricate the throttle 68 ●
Lubricate the choke control 68 ●
Lubricate the guide chain in the frame
tunnel
63 ●
Check the steering cables in the frame
tunnel
34 ●
Clean the engine’s cooling air intake 33 ●●
Clean the air filter's pre-cleaner
(foamed plastic)
38 ●●
Change the engine oil
1)
65 ●●
Clean the air cleaner’s filter cartridge
2)
(paper filter)
38 ●●
Check/adjust the cutting height 48 ●●
Check/adjust the parking brake 37 ●●
● = Described in this manual.
❍= Not described in this manual.
Maintenance Page Daily
main-
tenance
Weekly
3
main-
tenance
At
least
once
a year
Maintenance
interval in hours
b
efore after
25 50 100 300