Operators Manual

English-31
MAINTENANCE
1) First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace
every 50 hours.
2) Maintenance and replacement are required more often in dusty conditions.
3) The Rider should be lubricated twice weekly with daily use.
4) Performed by authorized service workshop.
5) Performed by authorized service workshop. First change after 50 hours.
Inspect the flame arrester/spark
extinguisher (extra equipment)
- ❍❍
Replace the hydraulic oil filter
(every 200 hours)
68 ●●
Replace the engine oil filter
(every 200 hours)
69 ●●
Clean/replace the spark plugs 42 ●●
Change the inline fuel filter 40 ●●
Clean the pulse air filter 40 ●●
Clean the cooling fins - ❍❍
Check the play in the engine valves
4)
- ❍❍
Check the need of an oil change
5)
and
filter replacement
4)
in the hydraulic
system. (every 200 hours)
- ❍❍
Replace the suction filter in the
hydraulic tank
4)
(every 200 hours)
❍❍
Replace the air filter's pre-cleaner
(foamed plastic)
2)
38 ●●
Change the air filter (paper filter)
2)
(every 200 hours)
38 ●●
Perform the 300-hour service
4)
- ❍❍
● = Described in this manual.
❍= Not described in this manual.
Maintenance Page Daily
main-
tenance
Weekly
3
main-
tenance
At
least
once
a year
Maintenance
interval in hours
b
efore after
25 50 100 300
WARNING!
No service operations may be performed
on the engine or cutting unit unless:
• The engine is stopped.
• The parking brake is actuated.
• The ignition key has been removed.
• The cutting unit is disengaged.
• The ignition cables have been
removed from the spark plugs.