Operators Manual

English-46
MAINTENANCE
1. Attach the unit to the equipment frame’s outer
hooks.
2. Pull out the catch (A) and loosen the safety catch
by pushing its handle (D) back.
3. Raise the unit by pulling up the mechanical lifting
lever, located on the driver’s right side.
4. Push the unit in so that the interior plugs (B) touch
the bottom of the equipment frame’s grooves.
5. Hook in the height adjustment handle’s (E) rear
fastener:
Move the cutting height lever to the forward
position. Loosen the strut by pulling the frame’s
forward section up or down.
8009-024
8009-167
A
D
8009-018
8009-168
E
WARNING!
Watch your fingers. Do not turn the
blades or the belt.