Operators Manual

English-50
MAINTENANCE
Cutting Unit Model
ProFlex can be equipped with two different types of
cutting unit:
• Combi 112
• Combi 122.
Other cutting units cannot be mounted without
changing the drive belt.
Checking the Blades
It is important that the blades are undamaged and well-
ground to give the best mowing result.
Check that the blades’ securing screws are tightened
with the torque:
• Combi 112: 45-50 Nm/32-36 lbf. ft.
• Combi 122: 75-80 Nm/53-56 lbf. ft.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the servicing
dealer judge whether the blade can be repaired/ground
or must be discarded.
8009-288
Combi 112
8009-290
Combi 122
6012-088
IMPORTANT INFORMATION
Replacement or sharpening of the blades
should be carried out by an authorised service
representative.
WARNING!
If the blade is cracked,
caused by inappropriate repair or other
damage, blade fracture can occur
during operation. The risk increases
when the blade is not correctly
balanced.