Operators Manual

English-55
MAINTENANCE
8. Pull the pump belt off of the engine's pulley and
move it under the engine belt pulleys.
9. Pull out the pump belt through the opening under
the pivot bearing and past the belt tensioner's
disc.
Assembly
10. Pull the pump belt through the opening under the
pivot bearing and on the outside past the belt
tensioner's disc.
11. Fit the pump belt on the engine's pulley, move it
under the engine belt pulleys.
12. Fit the belt on the pump's pulley.
13. Fit the cooling fan.
14. Tighten the cooling fan nut. Counter hold using a
punch in one of the holes on the underside of the
fan when the nut is tightened.
15. Check that the centre belt is fitted correctly on its
front pulley and fit the centre belt on the engine's
pulley
8009-640
8009-640
8009-641
8009-726