Operators Manual

English-57
MAINTENANCE
Replacing the Front Belt
Dismantling
The entire belt is removed according to the following
when a snow blade is to be attached to the machine.
1. Remove the cutting unit and hang the front part of
the belt around the safety catch handle.
2. Press the guide plate down under the anti-scalp
roller and push out the belt.
3. Pull the centre belt off of the centre pulley. The belt
becomes slack when the cutting unit is lifted.
4. Press in the spring-loaded belt guide under the
blade brake on the centre pulley and remove the
belt.
5. Remove the front belt from the centre pulley in the
same way as the centre belt and pull out the front
belt forwards.
8009-613
8009-343