Operators Manual

English-63
LUBRICATION
Lubricating in Accordance with the
Lubrication Schedule
The numbers in the following headings refer to the
lubrication points as described in ”Lubrication
Schedule” on page 61 and ”General” on page 62.
1. Pedal Mechanism in Frame Tunnel
Lubricate the pedal mechanism in the frame tunnel.
Remove the cover of the frame tunnel by loosening the
screws (two on the steering servo housing).
Work the pedals and lubricate the moving parts with an
oilcan.
Lubricate the cable for the drive pedals using an oil
can.
Lubricate the point ”2. Chains in the Frame Tunnel” on
page 63 and ”3. Parking Brake Cable” on page 64
before replacing the cover on the frame tunnel.
2. Chains in the Frame Tunnel
Remove the cover from the frame tunnel, see ”1. Pedal
Mechanism in Frame Tunnel” on page 63.
Lubricate the chains in the frame tunnel with an oilcan
or chain lubricant spray for motorcycles.
Lubricate the steering cable pulley axle with grease.
Move the pulleys to one side and brush grease on the
axle.
8009-340
8009-345
8009-346