Operators Manual

English-64
LUBRICATION
3. Parking Brake Cable
Remove the cover from the frame tunnel, see ”1. Pedal
Mechanism in Frame Tunnel” on page 63.
Lubricate both ends of the cable.
Remove the cable’s rubber casing when lubricating.
Lubricate the cable with an oil can, press the parking
brake pedal a few times and lubricate again.
Replace the cover on the frame tunnel.
4. Belt Tensioner
Lubricate using a grease gun, 1 nipple from the right-
hand side under the engine’s lower belt pulley, until
grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
8009-691
8009-686
6008-232