Operators Manual

English-67
LUBRICATION
6. Hydrostatic Cable
Remove the transmission cover, two screws.
Remove the rubber casing and lubricate the
hydrostatic transmission cable with an oilcan. Press
the pedal a few times and lubricate again.
Replace the rubber cover.
Replace the transmission cover.
7. Cutting Unit
Remove the front cover.
Lubricate using an oilcan:
A. The safety catch
- Joints and bearings
Lubricate using grease:
B. Interior plug
C. Groove for equipment frame
8. Driver’s Seat
Tilt the seat back.
Lubricate the lengthways adjustment mechanism with
the oilcan.
Lubricate the lengthways adjustment runners with
grease. Pull the seat back and forth and lubricate on
both sides.
8009-603
8009-692
6020-004
8009-347