Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Adjustment of the oil pump
- Cooling system
- Winter use
- Temperature -5°C or colder
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
ASSEMBLY
18 – English
chain saw when it is delivered. Contact your service
workshop to change the size of the handle insert.
Assembling the belt eyelet
The chain saw is fitted with two eyelets on the rear edge
of the chain saw cover, a rope eyelet and a belt eyelet. The
rope eyelet is fitted on delivery.
The belt eyelet is not fitted on delivery and is used by
chain saw users as a simple way to fasten the saw to a
belt or a harness. For more information, please see the
Working techniques section.
To fit a belt eyelet - contact your service agent.