Owner's manual

SERVICE WORK ON THE CHASSIS 13
143
E01126-10
– Check the chain sliding guard for wear.
»
If in area
C
by the chain sliding guard screw
1
is visi-
ble from above:
– Change the chain sliding guard.
– Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
– Tighten the screw of the chain sliding guard.
Guideline
Screw, chain slid-
ing guard
M6 7 Nm (5.2 lbf ft)
Finishing work
– Remove the rear of the motorcycle from the lifting gear.
( p. 110)