Owner's manual

14 BRAKE SYSTEM
144
14.1 Antilock brake system (ABS)
H02679-10
The ABS module
1
, which consists of a hydraulic unit, ABS
control unit, and return pump, is installed under the fuel tank.
One wheel speed sensor
2
is located in each case on the front
and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
– Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).
– Do not make any changes to the suspension travel.
– Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
– Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
– Maintain the specified tire air pressure.
– Service work and repairs must be performed prop-
erly. (Your authorized Husqvarna Motorcycles work-
shop will be glad to help.)