Owner's manual
15 WHEELS, TIRES
168
E01131-10
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change the rear wheel bearing.
–
Clean and grease shaft seal rings
1
and contact
surfaces
A
of the spacers.
Long-life grease ( p. 249)
– Clean the thread of the wheel spindle and axle nut.
– Clean and grease the wheel spindle.
Long-life grease ( p. 249)
– Clean the contact areas of the brake caliper support and
swingarm.
– Mount the rubber damper and rear sprocket carrier on the
rear wheel.
– Insert the narrow spacer into the side of the rear sprocket.
– Insert the wide spacer into the side of the brake disc.
– Position the rear wheel.
The brake linings are correctly positioned.
– Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
– Position the chain guard.